Chapter 33 Command Examples
This command shows the general system information (such as the firmware version and
system up time). An example is shown next.
sysname# show system-information
System Name
System Contact
System Location
Ethernet Address
ZyNOS F/W Version
RomRasSize
System up Time
Bootbase Version
ZyNOS CODE
Product Model
sysname#
33.2.7 show vdsl-alarmprofile
Syntax:
show vdsl-alarmprofile
This command displays a summary list of VDSL alarm profiles or displays the settings of a
VDSL alarm profile. The following example shows the summary table.
sysname# show vdsl-alarmprofile
Name
======================================================================
DEFVAL
sysname#
The following example shows the settings of the test alarm profile.
sysname# show vdsl-alarmprofile test
Profile Name
15Mins LOSs Threshold
15Mins ESs Threshold
15Mins SESs Threshold
Initialization Failure
sysname#
33.2.8 show vdsl-profile
Syntax:
show vdsl-profile [<profile-name>]
246
: VES-1616F-35
:
:
: 00:13:49:00:00:02
: V3.60(AIH.0)C0 | 01/25/2007
: 3364912
:
0:28:28 (29b44 ticks)
: V0.1 | 06/05/2006
: RAS Jan 19 2007 19:22:28
: VES-1616F-35
[<profile-name>]
LOSs
ESs
SESs
0
0
: test
: 15
: 10
: 5
: On
InitFailure
Applied Ports
0
Off
VES-1616F-3x Series User's Guide
1-16