Igmp Filtering Profile - ZyXEL Communications XMG1930 Series User Manual

Table 97 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping > IGMP Snooping VLAN
LABEL
Add
Cancel
Clear
Index
Name
VID
Delete
Cancel

24.3.3 IGMP Filtering Profile

An IGMP filtering profile specifies a range of multicast groups that clients connected to the Switch are
able to join. A profile contains a range of multicast IP addresses which you want clients to be able to
join. Profiles are assigned to ports (in the IGMP Snooping screen). Clients connected to those ports are
then able to join the multicast groups specified in the profile. Each port can be assigned a single profile.
A profile can be assigned to multiple ports.
Click Advanced Application > Multicast > IPv4 Multicast in the navigation panel. Click the IGMP
Snooping link and then the IGMP Filtering Profile link to display the screen as shown.
Figure 146 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping > IGMP Filtering Profile
Chapter 24 Multicast
DESCRIPTION
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the Save link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Click Cancel to reset the fields to your previous configuration.
Click Clear to reset the fields to the factory defaults.
This is the index number of the IGMP snooping VLAN entry in the table. Click an index number
to view more details or change the settings.
This field displays the descriptive name for this VLAN group.
This field displays the ID number of the VLAN group.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Check the entries that you want to remove, then click the Delete button.
Click Cancel to clear the check boxes.
XMG1930 Series User's Guide
211