3-15.3 Bandwidth Profile - ZyXEL Communications XGS3600 Series Manual

3-15.3 Bandwidth Profile

This page displays current EVC ingress bandwidth profile configurations. These policers may
be used to limit the traffic received on UNI ports. The settings can also be configured here.
Web Interface
To configure GARP Port Configuration in the web interface:
1. Click configure, EVC, Bandwidth Profile.
2. Scroll to set the State and Policer Mode Parameters
3. Click the Apply to save the setting
4. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values.
Figure 3-15.3: The Bandwidth Profile
Parameter description:
Start Policer ID :

The start Policer ID for displaying the table entries. The allowed range is from 1 through
128.
Number of Entries :

The number of entries per page. The allowed range is from 2 through 128.
Policer ID :

The Policer ID is used to identify one of the 128 policers.
State :

XGS3600 Series User's Guide
218