Parameter Copy Alarm Release - Mitsubishi Electric 800 Series Instruction Manual

(E) Environment setting parameters
Registering a parameter in a user group (Pr.173)
• To register Pr.3 in a user group
Power ON
1.
Make sure the motor is stopped.
Changing the operation mode
2.
Select the PU operation mode.
Selecting the parameter number
3.
Read Pr.173.
Parameter registration
4.
Set "3" in Pr.173.
Pr.3 is registered in the user group.
Clearing a parameter from a user group (Pr.174)
• To delete Pr.3 from a user group
Power ON
1.
Make sure the motor is stopped.
Changing the operation mode
2.
Select the PU operation mode.
Selecting the parameter number
3.
Read Pr.174.
Clearing the parameter
4.
Set "3" in Pr.173.
Pr.3 is deleted from the user group.
NOTE
• Pr.77 Parameter write selection, Pr.160, Pr.296 Password lock level, Pr.297 Password lock/unlock and Pr.991 PU
contrast adjustment can always be read regardless of the user group setting.
• Pr.77, Pr.160, Pr.172 to Pr.174, Pr.296, and Pr.297 cannot be registered in a user group.
• When Pr.174 is read, "9999" is always displayed. "9999" can be written, but it does not function.
• Pr.172 is disabled if set to a value other than "9999".
Parameters referred to ???????
Pr.77 Parameter write selection
Pr.296 Password lock level, Pr.297 Password lock/unlock
Pr.550 NET mode operation command source selection
Pr.551 PU mode operation command source selection
5.7.14

Parameter copy alarm release

The parameter copy alarm can be canceled. The parameter copy alarm is generated when parameter copy is
performed between the FR-A860-01080 or lower and the FR-A860-01440 or higher.
Pr.
989 Parameter copy alarm
E490 release

The setting range or initial value for the FR-A860-01080 or lower.

The setting range or initial value for the FR-A860-01440 or higher.
• The setting range of some parameters differ between the FR-A860-01080 or lower and the FR-A860-01440 or higher.
When parameter copy is performed between the FR-A860-01080 or lower and the FR-A860-01440 or higher, the
parameter copy alarm (CP) is displayed on the operation panel because resetting of some parameters is necessary.
• Use Pr.989 to cancel the parameter copy alarm. After setting Pr.989, perform setting of Pr.9, Pr.30, Pr.51, Pr.56, Pr.57,
Pr.61, Pr.70, Pr.72, Pr.80, Pr.82, Pr.90 to Pr.94, Pr.453, Pr.455, Pr.458 to Pr.462, Pr.557, Pr.859, Pr.860, and Pr.893
again.
260
PARAMETERS
page 251
page 253
page 301
page 301
Name Initial value
10

100

Operation
Operation
Setting range
Cancels the alarm of FR-A860-01080 or
10

lower.
Cancels the alarm of FR-A860-01440 or
100

higher.
Description