Cartridge Access Port; Figure 1-5. Reserved Cell Locations - StorageTek L700e Operator's Manual

Tape Library Components
Figure 1-5. Reserved Cell Locations (C65136)
1. Location of reserved cells
2. Swap cell (leave empty)
3. Diagnostic and cleaning cartridges

Cartridge Access Port

A cartridge access port (CAP) is the location where you add cartridges to or
remove cartridges from a library without interrupting normal cartridge mounts
and dismounts by the robot. The library may have an optional, second CAP.
Both CAPs are located on the right front door.
The CAP magazine is designed for easy loading. You can access the magazine
by simply pulling down on the magazine handle and adding cartridges. Or, you
can remove the magazine by lifting it out, load the cells, and place the
magazine back into the CAP. Snap-on cartridge retention covers allow you to
keep cartridges in place when transporting magazines.
For detailed procedures, refer
and "" in Chapter 4, "Library Operation."
1-10
DRIVE
COLUMN 1
to"Importing Data Cartridges through the CAP"
Tenth Edition
CAP B CAP A
2
1
3
C65136
95845