Group Drive; Speed Sensor Connection - BONFIGLIOLI ACTIVE Cube ACU 201-01 Operating Instructions Manual

6.4.3.4 Group drive

In the case of a group drive (several motors at one frequency inverter), the total
length shall be divided across the individual motors according to the value given in the
table. Please note that group drive with synchronous servomotors is not possible.
Use a thermal monitoring element on each motor (e.g. PTC resistor) in order to avoid
damage.

6.4.3.5 Speed sensor connection

Install sensor cables physically separate from motor cables. Comply with the sensor
manufacturer's specifications.
Connect the shield close to the frequency inverter and limit the length to the neces-
sary minimum.
58
Operating Instructions ACU
06/13