BONFIGLIOLI ACTIVE Cube ACU 201-01 Operating Instructions Manual page 188

Create Warning Mask
Controller Udc Limita-
33 -
tion
Controller
34 -
Voltage Pre-Control
35 - Controller I abs
Controller
36 -
Torque Limitation
Controller
37 -
Torque Control
38 - Ramp Stop
Contr. Intel. Curr. Lim.
39 -
LT-Ixt
Contr. Intel. Curr. Lim.
40 -
ST-Ixt
Contr. Intel. Curr. Lim.
41 -
Tc
Contr. Intel. Curr. Lim.
42 -
Motor Temp.
Controller
43 -
Freq. Limitation
101 to 143
The selected warning mask can be read out via the parameter
537. The above operation modes of parameter
coded in the
of the individual operation modes and the matching abbreviation.
188
536
The DC link voltage has exceeded the
limitation
The
Dyn. Voltage Pre-Control
control characteristics.
The output current is limited.
The output power or the torque is limited by the
speed controller.
Switch-over of field-orientated control between
speed and torque-controlled.
The
Operation mode
havior limits the output current.
Overload limit of the long-term Ixt (60s) reached,
intelligent current limits active.
Overload limit of the short-term Ixt (1s) reached,
intelligent current limits active.
Max. heat sink temperature T
Mode
Max. motor temperature T
Mode
The reference frequency has reached the
Frequency
Removal or deactivation of the operation mode with-
in the warning mask.
537. The code results from hexadecimal addition
Actual Warning Mask
Operating Instructions ACU
Function
680.
620 selected in starting be-
K
573 for the intelligent current limits active.
reached,
PTC
573 for the intelligent current limits active.
419. The frequency limitation is active.
Create Warning Mask
Reference UD
605 accelerates the
reached,
Operation
Operation
Maximum
Actual Warning Mask
536 are en-
06/13