BONFIGLIOLI ACTIVE Cube ACU 201-01 Operating Instructions Manual page 274

Example:
Output signals
The output of a warning message is signaled.
169 - General Warning
11 - Warning, General
1)
For linking with inverter functions
2)
For digital output
Meaning of code displayed by parameter
A 00 00 NO WARNING
A 00 01 BELT
A 00 02 SW-LIM CW
A 00 04 SW-LIM CCW
A 00 08 HW-LIM CW
A 00 10 HW-LIM CCW
A 00 20 CONT
A 00 40 Enc
A 00 80 User 1
A 01 00 User 2
Output signals
The output of an application warning message is signaled.
216 - Application Warning
26 - Warning, Application
1)
For linking with inverter functions
2)
For digital output
274
The following warning status is displayed:
A008D Ixt IxtLt Tc PTC
The warning status results from the hexadecimal sum of the warning
codes (0001+0004+0008+0080 = 008D).
The short-term overload (1 s), warning limit heat sink temperature and
warning limit motor temperature warnings are present.
1)
The output of a warning message in
2)
signaled.
Code
No warning message present.
Warning V-belt by
The positive SW limit switch was reached (parameter
Positive SW limit switch
The negative SW limit switch was reached (parameter
Negative SW limit switch
The positive HW limit switch was reached.
The negative HW limit switch was reached.
The contouring error monitoring range adjusted with
parameter
A connected encoder with data track triggered a warn-
ing.
The signal set on digital input
active.
The signal set on digital input
active.
1)
The output of a warning message in
2)
Warnings
Operating Instructions ACU
Application Warning Status
Warning Status
Operation mode
1145).
1146).
1105 was left.
Warning Threshold
User Warning 1
User Warning 2
273 is signaled.
269 is
Warnings
367:
581.
1363 is
1364 is
Application
06/13