BONFIGLIOLI ACTIVE Cube ACU 201-01 Operating Instructions Manual page 155

Reference frequency source
1 - Abs. value analog value MFI1A
2 - Abs. Analog Value EM-S1INA
4 - Abs. Value MFI1A + EM-S1INA
10 - Abs. value fixed frequency (FF)
11 - Abs. value MFI1A + FF
12 - Abs. Value EM-S1INA + FF
14 - Abs. Value MFI1A + EM-S1INA + FF Combination of the operation modes 10, 1 and 2.
20 - Abs. value Motorpoti (MP)
21 - Abs. value MFI1A + MP
22 - Abs. Value EM-S1INA + MP
24 - Abs. Value MFI1A + EM-S1INA + MP Combination of the operation modes 20, 1 and 2.
30 - Abs.Val. Speed Sensor 1 (F1)
31 - Abs. value MFI1A + F1
Abs. value repetition freq.-/PWM
32 -
input (F3)
33 - Abs. value MFI1A + F3
34 - Abs.Val. Speed Sensor 2 (F2)
35 - Abs. Value MFI1A + F2
40 - Abs. value Motorpoti (KP)
41 - Abs. value MFI1A + KP
42 - Abs. Value EM-S1INA + KP
44 - Abs. Value MFI1A + EM-S1INA + KP Combination of operation modes 40, 1 and 2.
Abs. value MFI1A + FF + KP + F3
80 -
+ (EM-S1INA)1)
Abs. value MFI1A + FF + KP + F1 +
81 -
1)
F3 + (EM-S1INA)
Abs. value MFI1A + FF + KP + F3
82 -
2)
+ (F2) + (EM-S1INA)
Abs. value MFI1A + FF + KP + F1 +
89 -
2)
F3 + (F2) + (EM-S1INA)
Abs. value MFI1A + FF + MP + F3
90 -
1)
+ (EM-S1INA)
Abs. value MFI1A + FF + MP + F1
91 -
+ F3 + (EM-S1INA)
Abs. value MFI1A + FF + MP + F3
92 -
+ (F2)2) + (EM-S1INA)
Abs. value MFI1A + FF + MP + F1 +
99 -
F3 + (F2)2) + (EM-S1INA)
101 to 199
1)
The reference value source is only available if an expansion module with analog input is connected. For infor-
mation, refer to the expansion module operating instructions.
2)
The reference value source is only available if an expansion module with speed sensor input is connected. For
information, refer to the expansion module operating instructions.
Operating Instructions ACU
06/13
475
Reference value source is the multifunctional input 1 in
analog
Reference value source is the analog input of the ex-
pansion module.
Combination of the operation modes 2 and 1.
The fixed frequency according to the
change-over 1
67 as well as the current data set.
Combination of the operation modes 10 and 1.
Combination of the operation modes 10 and 2.
Reference value source is the function
torpoti Up
Combination of the operation modes 20 and 1.
Combination of the operation modes 20 and 2.
The frequency signals in
uated as a reference value.
Combination of the operation modes 30 and 1.
The frequency signal on the digital input according to
Operation mode
cy input.
Combination of operation modes 1 and 32.
The frequency signals in
uated as a reference value.
Combination of operation modes 1 and 34.
KP 500 is the reference value source, with keys ▲ for
increasing the frequency and ▼ for reducing the fre-
quency.
Combination of operation modes 40 and 1.
Combination of operation modes 40 and 2.
Combination of the operation modes 1, 10, 40, 32
and 2.
Combination of the operation modes 1, 10, 40, 30, 32
and 2.
Combination of the operation modes 1, 10, 40, 32, 34
1)
and 2.
Combination of the operation modes 1, 10, 40, 30, 32 ,
1) 2)
34 and 2.
Combination of the operation modes 1, 10, 20, 32 and
1)
2.
Combination of the operation modes 1, 10, 20, 30, 32
1)
and 2.
Combination of the operation modes 1, 10, 20, 32, 34
1)
and 2.
Combination of the operation modes 1, 10, 20, 30, 32,
1) 2)
34 and 2.
Operation modes with signs (+/-)
Function
452.
Operation mode
66 and
Fixed frequency change-over 2
62 and
Frequency Motorpoti Down
Operation mode
496 for the PWM-/ repetition frequen-
Operation mode
1)
1)
1)
1)
1)
1)
1)
Fixed frequency
Frequency Mo-
63.
490 are eval-
490 are eval-
2)
2)
155