BONFIGLIOLI ACTIVE Cube ACU 201-01 Operating Instructions Manual page 192

74 - S5IND
75 - S6IND
76 - MFI1D
157 - Warning Mask
158 - Timer 1
159 - Timer 2
160 - Ready Signal
161 - Run Signal
162 - Error Signal
Reference Frequency
163 -
reached
164 - Setting Frequency
165 - Warning Ixt
Warning Heat Sink Tem-
166 -
perature
Warning Inside Tempera-
167 -
ture
Warning Motor Tempera-
168 -
ture
169 - General Warning
170 - Warning Overtemperature
171 - Output Comparator 1
Negated Output Compara-
172 -
tor 1
173 - Output Comparator 2
Negated Output Compara-
174 -
tor 2
175 - Digital Signal 1
176 - Digital Signal 2
177 - Digital Signal 3
Reference Percentage
178 -
reached
192
Digital Inputs
Operating Instructions ACU
Function
Signal on digital input S5IND (X210A.7) or re-
mote operation via communication interface.
Signal on digital input S6IND (X210B.1) or re-
mote operation via communication interface.
Signal at multifunction input MFI1 (X210B.6) in
452 = 3 - digital input or re-
Operation Mode
mote operation via communication interface.
The defined warning mask of parameter
536 signals a critical operating
Warning Mask
point.
Output signal of the time function according to
the input connection
Timer 1
Output signal of the time function according to
the input connection
Timer 2
Frequency inverter is initialized and ready for
operation.
Signal enable STO (S1IND/STOA and
S7IND/STOB) and a start command are present,
output frequency available.
Monitoring function signals an operational fault.
Signal when the
Actual frequency
reached the reference frequency.
Signal when the actual value
210 exceeds the value of
510.
cy
The monitoring functions report an overload of
the frequency inverter.
Max. heat sink temperature T
Warning Limit Heat Sink Temp.
Max. inside temperature T
Warning Limit Inside Temp
Warning behavior according to parameterized
Motor Temp. Operation mode
temperature T .
PTC
Signal when 269 are displayed with a
Warnings
critical operating point.
The value
− "80 °C minus
Warning Limit Heat Sink
407" or
Temp.
− "65 °C minus
Warning Limit Inside
408"
Temp.
is attained.
The comparison according to the selected
eration mode Comparator 1
Operation mode 171 with inverted logic (LOW
active)
The comparison according to the selected
eration mode Comparator 2
Operation mode 173 with inverted logic (LOW
active).
Signal according to parameter
530.
digital output 1
Signal according to parameter
554 on multifunctional output MFO1.
tion
Signal according to parameter
532.
digital output 3
Signal when the
Actual percentage
reached the
reference percentage
Create
83.
84.
241 has
Stator Frequency
Setting Frequen-
of 80 °C less the
K
407 reached.
of 65 °C less the
i
408 reached.
570 at max. motor
Op-
540 is true.
Op-
543 is true.
Operation mode
Digital Opera-
Operation mode
230 has
229.
06/13