Language; Programming - BONFIGLIOLI ACTIVE Cube ACU 201-01 Operating Instructions Manual

9.8

Language

The parameters are stored in the frequency inverter in various languages. The pa-
rameter description is displayed by the PC control software (e.g. VPlus) in the select-
ed
Language
Language
0 - Deutsch
1 - English
2 - Italiano
100 -
Up to ACU firmware 5.1.11 the language is set via
ACU firmware 5.2.0 the texts of the parameters is administered by the PC software
VPlus. When
Firmware version 5.2.0 or higher requires a compatible VPlus version (VPlus 7.38 or
higher).
9.9

Programming

The parameter
resetting to the factory settings. The display of the control unit reads "dEFLt" or "rE-
SEt" and the LEDs indicate the status of the frequency inverter.
Program(ming)
Parameter trans-
111 -
mission
Standard opera-
110 -
tion
123 - Reset
4444 - Default
Parameters
changed during resetting to factory settings (
122
33.
33
Parameter description in German.
Parameter description in English.
Parameter description in Italian.
The language is defined via VPlus (ACU firmware
5.2.0 or higher)
33 is set to 100, the settings 0,1 and 2 are not selectable.
Language
34 enables acknowledgment of a fault message and
Program(ming)
34
Control unit P 500 is prepared for parameter transmis-
sion. A connected frequency inverter can receive data
from the control unit.
Resetting of control unit KP 500 to standard operation
mode
The current error message can be acknowledged via
digital input S1IND/STOA or the software parameter.
The display of the control unit reads "rESEt".
The parameters of the selected configuration, except for
a few exceptions, are reset to the default settings. The
display of the control unit reads "dEFLt".
28,
Control level Language
Operating Instructions ACU
Function
33 = 0,1,2. Starting with
Language
Function
33 as well as
Configuration
34 = 4444).
Program(ming)
30 are not
06/13