BONFIGLIOLI ACTIVE Cube ACU 201-01 Operating Instructions Manual page 193

179 - Mains Failure
Warning Motor Protection
180 -
Switch
Digital Signal 4, EM-
181 -
Module
Digital Signal 5, EM-
182 -
Module
215 - Warning Mask, Application
216 - Application Warning
270 to 276
282 - Target Position Reached
284 - STOA inverted
285 - STOB inverted
292 - STOA
293 - STOB
320 - EM-S1IND
321 - EM-S2IND
322 - EM-S3IND
520 - EM-S1IND inverted
521 - EM-S2IND inverted
522 - EM-S3IND inverted
2
Refer to the application manual "Positioning" for further details.
3
Refer to the application manual "Safe Torque Off" for further details.
4
Refer to the operating instructions of the expansion modules with digital inputs.
Operating Instructions ACU
06/13
Digital Inputs
3
4
Function
Failure of the mains voltage and power regulation
active according to
Operation Mode
voltage controller.
Parameterized
Operation Mode
protection switch has triggered.
Signal according to operation mode for the digital
output of an expansion module.
Signal according to operation mode for the digital
output of an expansion module.
The defined warning mask of parameter
626 signals a critical oper-
Appl. Warning Mask
ating point.
All warnings application are activated. Display is
affected via parameter
Application Warn-
273.
ings
Operation modes 70 to 76 of the digital inputs in-
verted (LOW active).
469 of axle positioning
Reference orientation
was reached or
Target position / Distance
2
operation was reached (the current act. position
is within the range set in parameter
1165 for a minimum period of
dow
1166).
dow time
Inverted signal status on digital input
S1IND/STOA (first shutdown path STOA of safety
function STO - „Safe Torque Off").
Inverted signal status on digital input
S7IND/STOB (second shutdown path STOB of
safety function STO - „Safe Torque Off").
Signal status on digital input S1IND/STOA (first
shutdown path STOA of safety function STO -
„Safe Torque Off").
Signal status on digital input S7IND/STOB (sec-
ond shutdown path STOB of safety function STO
- „Safe Torque Off").
Signal on digital input 1 of an expansion module
EM or remote operation via communication inter-
face.
Signal on digital input 2 of an expansion module
EM or remote operation via communication inter-
face.
Signal on digital input 3 of an expansion module
EM or remote operation via communication inter-
face.
Operation mode 320 inverted.
Operation mode 321 inverted.
Operation mode 322 inverted.
670 for the
571 of the motor
Create
1202 of a positioning
Target win-
Target win-
193