To Load The Custom Fonts - HP 1670A Series User Manual

Using the X Window Interface
To load the custom fonts
To load the custom fonts
1
From the computer running your X server software, access the logic
analyzer's file system.
Refer to the "Accessing the Logic Analyzer File System" chapter.
2 Copy the
SMl
6 5 .
BDF
and
LG
16 5 .
BDF
files from the analyzer's
\ system\disk\hard \system
directory to a directory on your
computer.
3 Set up the X seiver so that it can read these fonts.
Refer to your X Windows server documentation for instructions on loading
and using custom fonts. Generally, the steps you will take are:
a Compile the .BDF files into the proper format.
b Build the font directory (FONTS.DIR) file.
c If the font directory is not in the current font path, add the new
directory to the font path.
The custom fonts make the analyzer's X Window interface look identical to
the instrument's display. If the custom fonts are not loaded, you
will
see odd
characters in place of arrow symbols and may see out-of-bounds text
in
the
X Window image.
3-10