Table of Contents
Advertisement
Load the Inverse Assembler and Sample Listing
In this exercise you will load a configuration file and the inverse assembler to
translate the binary data. You will not be making the measurement because
the training board does not have a microprocessor.
Place the flexible disk labeled "Logic Analyzer Training Kit
1
Configurations" in the disk drive.
Press the
2
Highlight the field to the right of
3
Select
Press the
4
Highlight the field to the right of
5
choose
If you are using an HP 1660 series analyzer, load the
6
these files:
•
IA386E (inverse assembler)
•
TRC_386._A. (sample listing)
If you are using an HP 1670 series analyzer, load the
7
these files:
•
ICPU32 (inverse assembler)
•
TRC_32._A (sample listing)
Result
Both the inverse assembler and the listing are loaded onto the analyzer with
the necessary configurations.
See Also
"To Load a Configuration File" in chapter 11 for more information.
MENU key.
Config
key and choose
State
in the pop-up menu.
System
MENU key.
Flexible Disk
in the pop-up menu.
Get other manuals https://www.bkmanuals.com
Introduction to Inverse Assembly
Load the Inverse Assembler and Sample Listing
in the Analyzer 1 box. Press the
Type
, press the
System
Select
Analyzer
Analyzer
key, and
with
with
10-3
Advertisement
Table of Contents
