Step 2 : Turning ON the Meter
Line Input
/Receptacle
Figure 4-3. Line Input Receptacle and Fuse
Line Input Receptacle
The AC Power cable is connected to this receptacle.
/f\ Fuse
Use the following fuse:
HP Part Number : 2110-038
(UL/CSA type, time delay 3 A 250 Vac)
If you need this fuse, contact your nearest Hewlett-Packard Sales and
Service Office.
Steps To Turn On The Power
1. Connect the AC power cable to the line input receptacle
2. Turn on the HP E4915A/E4916A (you need 10 minutes for warming
up).
3.
Press
((blue)} (. (Reset)}
to preset the meter.
44
Quick Start Guide