Specifications (MSO70000/C Series, DSA/DPO70000B/C Series, and DPO7000 Series)
Table 1-1: Channel input and vertical specifications, all MSO70000/C, DSA/DPO70000B/C, and DPO7000 Series
models (cont.)
5 GS/s
Enhanced bandwidth
Step gain
0.5 GHz
500 mV
13.0 mV
200 mV
5.35 mV
100 mV
2.95 mV
50 mV
1.35 mV
20 mV
0.54 mV
10 mV
0.3 mV
5 mV
0.19
2 mV
0.11 mV
1 mV
0.09 mV
2.5 GS/s
Enhanced bandwidth
Step gain
0.5 GHz
500 mV
15.0 mV
200 mV
6.2 mV
100 mV
3.35 mV
1.56 mV
50 mV
20 mV
0.63 mV
10 mV
0.375 mV
0.205 mV
5 mV
2 mV
0.11 mV
1 mV
0.09 mV
Channel-to-channel crosstalk (channel isolation)
≥ 4 GHz models, typical
< 4 GHz models, typical
Delay between channels, full
bandwidth, equivalent time, typical,
≥ 4 GHz models
Delay between channels, typical,
< 4 GHz models
1–32
Input frequency range (up to the rated bandwidth). Assumes two
channels with the same scale and bandwidth settings
0 to 10 GHz
> 10 GHz to 12 GHz
> 12 GHz to 15 GHz
> 15 GHz to 20 GHz
RMS voltage ratio of ≥ 100:1 at ≤ 100 MHz and ≥ 30:1 at > 100 MHz up to 2.5 GHz, and
≥20:1 above 2.5 GHz
≤ 100 ps between any two channels with the same scale and coupling settings.
≤ 50 ps delay change when enabling and disabling Channel Equalization (DSP matching).
≤ 100 ps between any two channels with the same scale and coupling settings with input
impedance set to 50Ω, DC coupling and scale set at or above 10 mV/div.
MSO70000/C, DSA70000B/C, DPO7000B/C, DPO7000, MSO5000, DPO5000 Series
Without enhanced bandwidth
0.5 GHz
0.025 GHz
15.1 mV
14.0 mV
6.35 mV
5.7 mV
3.4 mV
2.95 mV
1.6 mV
1.45 mV
0.645 mV
0.58 mV
0.34 mV
0.3 mV
0.21 mV
0.165 mV
0.13 mV
0.1 mV
0.096 mV
0.097 mV
Without enhanced bandwidth
0.5 GHz
0.025 GHz
15.1 mV
14.0 mV
6.35 mV
5.7 mV
3.4 mV
2.95 mV
1.6 mV
1.45 mV
0.645 mV
0.58 mV
0.34 mV
0.3 mV
0.21 mV
0.165 mV
0.13 mV
0.1 mV
0.096 mV
0.097 mV
0.02 GHz
13.2 mV
5.4 mV
2.75 mV
1.38 mV
0.55 mV
0.277 mV
0.141 mV
0.062 mV
0.04 mV
0.02 GHz
13.2 mV
5.4 mV
2.75 mV
1.38 mV
0.55 mV
0.277 mV
0.141 mV
0.062 mV
0.04 mV
Isolation
≥ 120:1
≥ 80:1
≥ 50:1
≥ 25:1
Need help?
Do you have a question about the MSO70000 Series and is the answer not in the manual?