Snmp-Server Enable Traps Cpu - Cisco Catalyst 3650 series Command Reference Manual

snmp-server enable traps cpu

To enable CPU notifications, use the snmp-server enable traps cpu command in global configuration mode.
Use the no form of this command to return to the default setting.
snmp-server enable traps cpu [threshold]
no snmp-server enable traps cpu [threshold]
Syntax Description
threshold
Command Default
The sending of CPU notifications is disabled.
Command Modes
Global configuration
Command History
Release
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
Specify the host (NMS) that receives the traps by using the snmp-server host global configuration command.
If no trap types are specified, all trap types are sent.
Informs are not supported in SNMPv1.
Note
To enable more than one type of trap, you must enter a separate snmp-server enable traps command for
each trap type.
Examples This example shows how to generate CPU threshold notifications:
Device(config)# snmp-server enable traps cpu threshold
(Optional) Enables CPU threshold notification.
Modification
This command was introduced.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
snmp-server enable traps cpu
539