Command Reference, Cisco Ios Xe Everest 16.5.1A (Catalyst 3650 Switches - Cisco Catalyst 3650 series Command Reference Manual

cts role-based l2-vrf
Use the interface vlan command to configure an SVI interface, and the vrf forwarding command to associate
a VRF instance to the interface.
The VRF-to-VLAN assignment is retained even when the assignment becomes inactive. It is reactivated when
the SVI is removed or when the SVI IP address is changed. When reactivated, the IP–SGT bindings are moved
back from the FIB table associated with the VRF of the SVI to the FIB table associated with the VRF assigned
by the cts role-based l2-vrf command.
Examples The following example shows how to select a list of VLANS to be assigned to a VRF instance:
Switch(config)# cts role-based l2-vrf vrf1 vlan-list 20
The following example shows how to configure an SVI interface and associate a VRF instance:
Switch(config)# interface vlan 101
Switch(config-if)# vrf forwarding vrf1
Related Commands
Command
interface vlan
vrf forwarding
show cts role-based permissions

Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)

734
Description
Configures a VLAN interface.
Associates a VRF instance or a virtual network with
an interface or subinterface.
Displays the SGACL permission list.