Show Monitor - Cisco Catalyst 3650 series Command Reference Manual

show monitor

To display information about all Switched Port Analyzer (SPAN) and Remote SPAN (RSPAN) sessions, use
the show monitor command in EXEC mode.
show monitor [session {session_number | all | local | range list | remote} [detail]]
Syntax Description
session
session_number
all
local
range list
remote
detail
Command Modes
User EXEC
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SECisco IOS
XE 3.3SE
Usage Guidelines
The output is the same for the show monitor command and the show monitor session all command.
(Optional) Displays information about specified SPAN
sessions.
(Optional) Displays all SPAN sessions.
(Optional) Displays only local SPAN sessions.
(Optional) Displays a range of SPAN sessions, where list is
the range of valid sessions. The range is either a single
session or a range of sessions described by two numbers,
the lower one first, separated by a hyphen. Do not enter any
spaces between comma-separated parameters or in
hyphen-specified ranges.
Note This keyword is available only in privileged EXEC
mode.
(Optional) Displays only remote SPAN sessions.
(Optional) Displays detailed information about the specified
sessions.
Modification
This command was introduced.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
show monitor
521