Net6-Show - Cisco Catalyst 3650 series Command Reference Manual

net6-show

To display IPv6 network parameters, use the net6-show command in rommon mode.
net6-show
This command has no arguments or keywords.
Command Modes
Rommon
Command History
Release
Cisco IOS XE Everest 16.5.1
Usage Guidelines
Examples
The following is sample output from the net6-show command:
Device: net6-show
switch: net6-show
IP6 addresses
link-local addr fe80::366f:90ff:feb8:cb80
site-local addr fec0::366f:90ff:feb8:cb80
--
all-nodes addr ff02::1
all-routers addr ff02::2
all-dhcp addr ff02::1:2
Slct-node addr ff02::1:ffb8:cb80
dhcp mmac addr 33:33:ff:00:99:99
router mac addr 78:da:6e:13:85:80
IP6 neighbour table
0: ip6 fec0::366f:90ff:feb8:cb80 MAC 34:6f:90:b8:cb:80
1: ip6 fe80::366f:90ff:feb8:cb80 MAC 34:6f:90:b8:cb:80
2: ip6 fe80::7ada:6eff:fe13:8580 MAC 78:da:6e:13:85:80
3: ip6 2001:dead:beef:cafe::5 MAC 30:f7:0d:08:7e:bd
4: ip6 fe80::32f7:dff:fe08:7ebd MAC 30:f7:0d:08:7e:bd
Related Commands
Command
net-show
DHCP addr 2001:dead:beef:cafe::9999
router addr fe80::7ada:6eff:fe13:8580
SLAAC addr 2001:dead:beef:cafe:366f:90ff:feb8:cb80 /64
SLAAC addr f00d::366f:90ff:feb8:cb80 /64
SLAAC addr feed::366f:90ff:feb8:cb80 /64
null addr ::
ll mmac addr 33:33:00:00:00:01
sl mmac addr 33:33:00:00:00:02
sn mmac addr 33:33:ff:b8:cb:80
Modification
This command was introduced.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
Description
Displays network parameters.
net6-show
591