Snmp-Server Enable Traps - Cisco Catalyst 3650 series Command Reference Manual

snmp-server enable traps

To enable the device to send Simple Network Management Protocol (SNMP) notifications for various traps
or inform requests to the network management system (NMS), use the snmp-server enable traps command
in global configuration mode. Use the no form of this command to return to the default setting.
snmp-server enable traps [auth-framework [sec-violation] | bridge | call-home | cluster | config |
config-copy | config-ctid | copy-config | cpu | dot1x | energywise | entity | envmon | errdisable |
event-manager | flash | fru-ctrl | license | mac-notification | port-security | power-ethernet | rep | snmp
| stackwise | storm-control | stpx | syslog | transceiver | tty | vlan-membership | vlancreate | vlandelete |
vstack | vtp ]
no snmp-server enable traps [auth-framework [sec-violation] | bridge | call-home | cluster | config |
config-copy | config-ctid | copy-config | cpu | dot1x | energywise | entity | envmon | errdisable |
event-manager | flash | fru-ctrl | license | mac-notification | port-security | power-ethernet | rep | snmp
| stackwise | storm-control | stpx | syslog | transceiver | tty | vlan-membership | vlancreate | vlandelete |
vstack | vtp ]
Syntax Description
auth-framework
sec-violation
bridge
call-home
cluster
config
config-copy
config-ctid
copy-config
cpu
dot1x
energywise
entity
envmon
errdisable
event-manager
(Optional) Enables SNMP CISCO-AUTH-FRAMEWORK-MIB
traps.
(Optional) Enables SNMP camSecurityViolationNotif notifications.
(Optional) Enables SNMP STP Bridge MIB traps.*
(Optional) Enables SNMP CISCO-CALLHOME-MIB traps.*
(Optional) Enables SNMP cluster traps.
(Optional) Enables SNMP configuration traps.
(Optional) Enables SNMP configuration copy traps.
(Optional) Enables SNMP configuration CTID traps.
(Optional) Enables SNMP copy-configuration traps.
(Optional) Enables CPU notification traps.*
(Optional) Enables SNMP dot1x traps.*
(Optional) Enables SNMP energywise traps.*
(Optional) Enables SNMP entity traps.
(Optional) Enables SNMP environmental monitor traps.*
(Optional) Enables SNMP errdisable notification traps.*
(Optional) Enables SNMP Embedded Event Manager traps.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
snmp-server enable traps
531