show flow record
To display the status and statistics for a Flexible NetFlow flow record, use the show flow record command
in privileged EXEC mode.
show flow record [broker [detail| picture]| [name] record-name]
Syntax Description
broker
detail
picture
name
record-name
Command Default
None
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Examples
The following example displays the status and statistics for FLOW-RECORD-1:
Device# show flow record FLOW-RECORD-1
flow record FLOW-RECORD-1:
Description:
No. of users:
Total field space:
Fields:
(Optional) Displays information about the state of the broker for the Flexible
NetFlow flow record.
(Optional) Displays detailed information about the flow record broker.
(Optional) Displays a picture of the broker state.
(Optional) Specifies the name of a flow record.
(Optional) Name of a user-defined flow record that was previously configured.
User defined
0
24 bytes
match ipv6 destination address
match transport source-port
collect interface input
Modification
This command was introduced.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
show flow record
471