Domain - Cisco Catalyst 3650 series Command Reference Manual

domain

Configures the fabric domain and enters fabric-auto-domain configuration mode. The no version of this
command deletes the fabric domain.
domain { default| name name }
no domain
Syntax Description
default
name name
Command Default
None
Command Modes
Fabric-auto configuration mode
Command History
Release
Cisco IOS XE Denali 16.3.1
Usage Guidelines
We recommend that you use the default domain, unless your network requires you to create a new domain.
This command allows you to enter fabric-auto domain configuration mode where you can configure edge,
control-plane and border devices in the fabric domain.
Device(config-fabric-auto)#domain default
Examples
Device(config-fabric-auto)#domain name exampledomain
Configures the default fabric domain and enters fabric-auto domain
configuration mode.
Configures a new fabric domain and enters fabric-auto domain configuration
mode.
Modification
This command was introduced.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
domain
17