Command Reference, Cisco Ios Xe Everest 16.5.1A (Catalyst 3650 Switches - Cisco Catalyst 3650 series Command Reference Manual

deny (MAC access-list configuration)
dsm
etype-6000
etype-8042
lat
lavc-sca
lsap lsap-number mask
mop-console
mop-dump
msdos
mumps
netbios
vines-echo
vines-ip
xns-idp
cos cos
Command Default
This command has no defaults. However, the default action for a MAC-named ACL is to deny.
Command Modes
Mac-access list configuration

Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)

740
(Optional) Specifies EtherType DEC-DSM.
(Optional) Specifies EtherType 0x6000.
(Optional) Specifies EtherType 0x8042.
(Optional) Specifies EtherType DEC-LAT.
(Optional) Specifies EtherType DEC-LAVC-SCA.
(Optional) Specifies the LSAP number (0 to 65535) of a
packet with 802.2 encapsulation to identify the protocol of
the packet.
mask is a mask of don't care bits applied to the LSAP number
before testing for a match.
(Optional) Specifies EtherType DEC-MOP Remote Console.
(Optional) Specifies EtherType DEC-MOP Dump.
(Optional) Specifies EtherType DEC-MSDOS.
(Optional) Specifies EtherType DEC-MUMPS.
(Optional) Specifies EtherType DEC- Network Basic
Input/Output System (NetBIOS).
(Optional) Specifies EtherType Virtual Integrated Network
Service (VINES) Echo from Banyan Systems.
(Optional) Specifies EtherType VINES IP.
(Optional) Specifies EtherType Xerox Network Systems
(XNS) protocol suite (0 to 65535), an arbitrary EtherType in
decimal, hexadecimal, or octal.
(Optional) Specifies a class of service (CoS) number from 0
to 7 to set priority. Filtering on CoS can be performed only
in hardware. A warning message reminds the user if the cos
option is configured.