net-debug
net-debug
To display or change the network debug values use the net-debug command in rommon mode.
net-debug [new-value]
Syntax Description
new-value
Command Modes
Rommon
Command History
Release
Cisco IOS XE Everest 16.5.1
Usage Guidelines
This command enables or disables log levels for each of the following functional areas:
• Domain Name System (DNS)
• Dynamic Host Control Protocol (DHCP)
• File Transfer Protocol (FTP)
• Hypertext Transfer Protocol (HTTP)
• IP
• TCP
• UDP
• Uniform Resource Identifier (URI)
Examples
This following is sample output from the net-debug command:
Device: net-debug
ether: 0
dhcp: 0
udp:
tcp: 0
http: 0
dns: 0
uri: 0
t/ftp: 2
ip6: 0
dhcp6: 0:000 200 000 000
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
586
ip: 0
0
(Optional) New debug value to use.
Modification
This command was introduced.