Show Errdisable Recovery - Cisco Catalyst 3650 series Command Reference Manual

show errdisable recovery

To display the error-disabled recovery timer information, use the show errdisable recovery command in
EXEC mode.
show errdisable recovery
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
User EXEC
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SE
Usage Guidelines
A gbic-invalid error-disable reason refers to an invalid small form-factor pluggable (SFP) module interface.
Though visible in the output, the unicast-flood field is not valid.
Note
Examples This is an example of output from the show errdisable recovery command:
Device> show errdisable recovery
ErrDisable Reason
-----------------
udld
bpduguard
security-violatio
channel-misconfig
vmps
pagp-flap
dtp-flap
link-flap
l2ptguard
psecure-violation
gbic-invalid
dhcp-rate-limit
unicast-flood
storm-control
arp-inspection
loopback
Timer interval:300 seconds
Interfaces that will be enabled at the next timeout:
Interface
Timer Status
--------------
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Errdisable reason Time left(sec)
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
show errdisable recovery
Modification
This command was introduced.
75