Command Reference, Cisco Ios Xe Everest 16.5.1A (Catalyst 3650 Switches - Cisco Catalyst 3650 series Command Reference Manual

switchport
Examples
This example shows how to cause an interface to cease operating as a Layer 2 port and become a Cisco-routed
port:
Device(config-if)# no switchport
This example shows how to cause the port interface to cease operating as a Cisco-routed port and convert to
a Layer 2 switched interface:
Device(config-if)# switchport

Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)

356