Show Ip Pim Mdt Send - Cisco Catalyst 3650 series Command Reference Manual
Cisco ios xe everest 16.5.1a
Hide thumbs
Also See for Catalyst 3650 series:
- Hardware installation manual (126 pages) ,
- Configuration manual (94 pages) ,
- Manual (94 pages)
Table of Contents
Advertisement
show ip pim mdt send
show ip pim mdt send
To display the data multicast distribution tree (MDT) groups in use, use the show ip pim mdt send command
in privileged EXEC mode.
show ip pim vrf vrf-name mdt send
Syntax Description
vrf vrf-name
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE Denali 16.3.2
Usage Guidelines
Use this command to show the data MDT groups in use by a specified MVRF.
Examples
The following is sample output from the show ip pim mdt send command:
Device# show ip pim vrf vpn8 mdt send
MDT-data send list for VRF:vpn8
(source, group)
(10.100.8.10, 225.1.8.1)
(10.100.8.10, 225.1.8.2)
(10.100.8.10, 225.1.8.3)
(10.100.8.10, 225.1.8.4)
(10.100.8.10, 225.1.8.5)
(10.100.8.10, 225.1.8.6)
(10.100.8.10, 225.1.8.7)
(10.100.8.10, 225.1.8.8)
(10.100.8.10, 225.1.8.9)
(10.100.8.10, 225.1.8.10)
The table below describes the significant fields shown in the display.
Table 22: show ip pim mdt send Field Descriptions
Field
source, group
MDT-data group
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
400
Displays the data MDT groups in use by the Multicast
VPN (MVPN) routing and forwarding (MVRF)
instance specified for the vrf-name argument.
Modification
This command was introduced.
MDT-data group
ref_count
232.2.8.0
1
232.2.8.1
1
232.2.8.2
1
232.2.8.3
1
232.2.8.4
1
232.2.8.5
1
232.2.8.6
1
232.2.8.7
1
232.2.8.8
1
232.2.8.9
1
Description
Source and group addresses that this router has
switched over to data MDTs.
Multicast address over which these data MDTs are
being sent.
Advertisement
Table of Contents
