Show Ip Nhrp Nhs - Cisco Catalyst 3650 series Command Reference Manual

show ip nhrp nhs

To display Next Hop Resolution Protocol (NHRP) next hop server (NHS) information, use the show ip nhrp
nhscommand in user EXEC or privileged EXEC mode.
show ip nhrp nhs [interface] [detail] [redundancy [cluster number | preempted | running | waiting]]
Syntax Description
interface
detail
redundancy
cluster number
preempted
running
waiting
Command Modes
User EXEC (>)
Privileged EXEC (#)
Command History
Release
Cisco IOS XE Denali 16.3.1
Usage Guidelines
The table below lists the valid types, number ranges, and descriptions for the optional interfaceargument.
The valid types can vary according to the platform and interfaces on the platform.
Note
(Optional) Displays NHS information currently
configured on the interface. See the table below for
types, number ranges, and descriptions.
(Optional) Displays detailed NHS information.
(Optional) Displays information about NHS
redundancy stacks.
(Optional) Displays redundancy cluster information.
(Optional) Displays information about NHS that failed
to become active and is preempted.
(Optional) Displays NHSs that are currently in
Responding or Expecting replies states.
(Optional) Displays NHSs awaiting to be scheduled.
Modification
This command was introduced.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
show ip nhrp nhs
191