Ttl; Command Reference, Cisco Ios Xe Everest 16.5.1A (Catalyst 3650 Switches - Cisco Catalyst 3650 series Command Reference Manual

ttl

ttl
To configure the time-to-live (TTL) value, use the ttl command in flow exporter configuration mode. To
remove the TTL value, use the no form of this command.
ttl ttl
no ttl ttl
Syntax Description
ttl
Command Default
Flow exporters use a TTL of 255.
Command Modes
Flow exporter configuration
Command History
Release
Cisco IOS XE 3.3SE
Usage Guidelines
To return this command to its default settings, use the no ttl or default ttl flow exporter configuration command.
Examples The following example specifies a TTL of 15:
Device(config)# flow exporter FLOW-EXPORTER-1
Device(config-flow-exporter)# ttl 15

Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)

478
Time-to-live (TTL) value for exported datagrams. The range is 1 to 255. The default is
255.
Modification
This command was introduced.