Command Reference, Cisco Ios Xe Everest 16.5.1A (Catalyst 3650 Switches - Cisco Catalyst 3650 series Command Reference Manual

Examples
This example shows how to set the learning method to learn the address on the physical port within the
EtherChannel:
Device(config-if)# pagp learn-method physical-port
This example shows how to set the learning method to learn the address on the port channel within the
EtherChannel:
Device(config-if)# pagp learn-method aggregation-port
You can verify your settings by entering the show running-config privileged EXEC command or the show
pagp channel-group-number internal privileged EXEC command.
Related Commands
Command
pagp port-priority
show pagp
Description
Selects a port over which all traffic through the EtherChannel is sent.
Displays Port Aggregation Protocol (PAgP) channel-group information.

Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)

pagp learn-method
315