Command Reference, Cisco Ios Xe Everest 16.5.1A (Catalyst 3650 Switches - Cisco Catalyst 3650 series Command Reference Manual

Transport Protocol:
Destination Port:
Source Port:
DSCP:
TTL:
Output Features:
This table describes the significant fields shown in the display:
Table 23: show flow exporter Field Descriptions
Field
Flow Exporter
Description
Transport Configuration
Destination IP address
Source IP address
Transport Protocol
Destination Port
Source Port
DSCP
TTL
Output Features
The following example displays the status and statistics for all of the flow exporters configured on a device:
Device# show flow exporter name FLOW-EXPORTER-1 statistics
Flow Exporter FLOW-EXPORTER-1:
Packet send statistics (last cleared 2w6d ago):
Successfully sent:
UDP
9995
55864
0x0
255
Used
Description
The name of the flow exporter that you configured.
The description that you configured for the exporter,
or the default description User defined.
The transport configuration fields for this exporter.
The IP address of the destination host.
The source IP address used by the exported packets.
The transport layer protocol used by the exported
packets.
The destination UDP port to which the exported
packets are sent.
The source UDP port from which the exported packets
are sent.
The differentiated services code point (DSCP) value.
The time-to-live value.
Specifies whether the output-features command,
which causes the output features to be run on Flexible
NetFlow export packets, has been used or not.
0

Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)

show flow exporter
(0 bytes)
463