Ip Dhcp Snooping Database - Cisco Catalyst 3650 series Command Reference Manual

ip dhcp snooping database

To configure the Dynamic Host Configuration Protocol (DHCP)-snooping database, use the ip dhcp snooping
database command in global configuration mode. To disable the DHCP-snooping database, use the no form
of this command.
no ip dhcp snooping database [ timeout | write-delay ]
Syntax Description
flash:url
ftp:url
http:url
https:url
rcp:url
scp:url
tftp:url
timeout seconds
write-delay seconds
Command Default
The DHCP-snooping database is not configured.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
ip dhcp snooping database
Specifies the database URL for
storing entries using flash.
Specifies the database URL for
storing entries using FTP.
Specifies the database URL for
storing entries using HTTP.
Specifies the database URL for
storing entries using secure HTTP
(https).
Specifies the database URL for
storing entries using remote copy
(rcp).
Specifies the database URL for
storing entries using Secure Copy
(SCP).
Specifies the database URL for
storing entries using TFTP.
Specifies the abort timeout interval;
valid values are from 0 to 86400
seconds.
Specifies the amount of time before
writing the DHCP-snooping entries
to an external server after a change
is seen in the local DHCP-snooping
database; valid values are from 15
to 86400 seconds.
765