Clear Location - Cisco Catalyst 3650 series Command Reference Manual

clear location

To clear a specific radio frequency identification (RFID) tag or all of the RFID tags information in the entire
database, use the clear location command in EXEC mode.
clear location [mac-address mac-address | rfid]
Syntax Description
mac-address mac-address
rfid
Command Default
No default behavior or values.
Command Modes
User EXEC
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Examples This example shows how to clear information about all of the RFID tags in the database:
Device> clear location rfid
MAC address of a specific RFID tag.
Specifies all of the RFID tags in the database.
Modification
This command was introduced.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
clear location
909