Mlog - Cisco Catalyst 3650 series Command Reference Manual

mlog

To direct log messages to a memory buffer instead of the serial port, use the mlog command in rommon mode.
mlog [show | reset | ctrl [on | off | toggle]]
Syntax Description
show
reset
ctrl
on
off
toggle
Command Modes
Rommon
Command History
Release
Cisco IOS XE Everest 16.5.1
Usage Guidelines
This command directs protocol log (that is all logs controlled by the net-debug command) messages to a
memory buffer instead of the serial port.
With memory logging, log messages are displayed after a test is run. For example, HTTP debugs can be
enabled through memory logging. Log messages are displayed in the memory buffer after running a copy
from http://server/name to null: command.
Examples The following example shows how to direct log messages to the memory buffer:
Device: mlog show
Related Commands
Command
net-debug
Modification
This command was introduced.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
(Optional) Displays memory log messages.
(Optional) Resets the logging of messages to
the memory log.
(Optional) Turns memory logging on, off, or
toggles it.
(Optional) Turns memory logging on.
(Optional) Turns off memory logging.
(Optional) Toggles between memory logging
on and off.
Description
Displays or changes the network debug values.
mlog
585