Match Flow Direction - Cisco Catalyst 3650 series Command Reference Manual

match flow direction

match flow direction
To configure the flow direction as key fields for a flow record, use the match flow direction command in
flow record configuration mode. To disable the use of the flow direction as key fields for a flow record, use
the no form of this command.
match flow direction
no match flow direction
Syntax Description
This command has no arguments or keywords.
Command Default
The flow direction is not configured as key fields.
Command Modes
Flow record configuration
Command History
Release
Cisco IOS XE 3.3SE
Usage Guidelines
A flow record requires at least one key field before it can be used in a flow monitor. The key fields distinguish
flows, with each flow having a unique set of values for the key fields. The key fields are defined using the
match command.
The match flow direction command captures the direction of the flow as a key field. This feature is most
useful when a single flow monitor is configured for input and output flows. It can be used to find and eliminate
flows that are being monitored twice, once on input and once on output. This command can help to match up
pairs of flows in the exported data when the two flows are flowing in opposite directions.
Examples The following example configures the direction the flow was monitored in as a key field:
Device(config)# flow record FLOW-RECORD-1
Device(config-flow-record)# match flow direction
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
444
Modification
This command was introduced.