Template Data Timeout - Cisco Catalyst 3650 series Command Reference Manual

template data timeout

template data timeout
To specify a timeout period for resending flow exporter template data, use the template data timeout command
in flow exporter configuration mode. To remove the template resend timeout for a flow exporter, use the no
form of this command.
template data timeout seconds
no template data timeout seconds
Syntax Description
seconds
Command Default
The default template resend timeout for a flow exporter is 600 seconds.
Command Modes
Flow exporter configuration
Command History
Release
Cisco IOS XE 3.3SE
Usage Guidelines
Flow exporter template data describes the exported data records. Data records cannot be decoded without the
corresponding template. The template data timeout command controls how often those templates are exported.
To return this command to its default settings, use the no template data timeout or default template data
timeout flow record exporter command.
Examples The following example configures resending templates based on a timeout of 1000 seconds:
Device(config)# flow exporter FLOW-EXPORTER-1
Device(config-flow-exporter)# template data timeout 1000
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
476
Timeout value in seconds. The range is 1 to 86400. The default is 600.
Modification
This command was introduced.