Match Ipv4 Source Address - Cisco Catalyst 3650 series Command Reference Manual

match ipv4 source address

match ipv4 source address
To configure the IPv4 source address as a key field for a flow record, use the match ipv4 source address
command in flow record configuration mode. To disable the use of the IPv4 source address as a key field for
a flow record, use the no form of this command.
match ipv4 source address
no match ipv4 source address
Syntax Description
This command has no arguments or keywords.
Command Default
The IPv4 source address is not configured as a key field.
Command Modes
Flow record configuration
Command History
Release
Cisco IOS XE 3.3SE
Usage Guidelines
A flow record requires at least one key field before it can be used in a flow monitor. The key fields distinguish
flows, with each flow having a unique set of values for the key fields. The key fields are defined using the
match command.
To return this command to its default settings, use the no match ipv4 source address or default match ipv4
source address flow record configuration command.
Examples The following example configures the IPv4 source address as a key field:
Device(config)# flow record FLOW-RECORD-1
Device(config-flow-record)# match ipv4 source address
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
448
Modification
This command was introduced.