Match Flow Cts - Cisco Catalyst 3650 series Command Reference Manual

match flow cts

To configure CTS source group tag and destination group tag for a flow record, use thematch flow cts
command in flow record configuration mode. To disable the group tag as key field for a flow record, use the
no form of this command.
match flow cts {source| destination} group-tag
no match flow cts {source| destination} group-tag
Syntax Description
cts destination group-tag
cts source group-tag
Command Default
The CTS destination or source field group, flow direction and the flow sampler ID are not configured as key
fields.
Command Modes
Flexible NetFlow flow record configuration (config-flow-record)
Policy inline configuration (config-if-policy-inline)
Command History
Release
Cisco IOS XE 3.7.3E
Cisco IOS XE Denali 16.2.1
Usage Guidelines
A flow record requires at least one key field before it can be used in a flow monitor. The key fields distinguish
flows, with each flow having a unique set of values for the key fields. The key fields are defined using the
match command.
Examples The following example configures the source group-tag as a key field:
Device(config)# flow record FLOW-RECORD-1
Device(config-flow-record)# match flow cts source group-tag
Configures the CTS destination field group as a key field.
Configures the CTS source field group as a key field.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
match flow cts
Modification
This command was introduced.
This command was reintroduced.
This command was not supported
in Cisco IOS XE Denali 16.1.x
443