Command Reference, Cisco Ios Xe Everest 16.5.1A (Catalyst 3650 Switches - Cisco Catalyst 3650 series Command Reference Manual

show ip nhrp nhs
Table 12: Valid Types, Number Ranges, and Interface Descriptions
Valid Types
ANI
Auto-Template
GMPLS
GigabitEthernet
InternalInterface
LISP
loopback
Null
PROTECTION_GROUP
Port-channel
TenGigabitEthernet
Tunnel
Tunnel-tp
Vlan
Examples The following is sample output from the show ip nhrp nhs detail command:
Switch# show ip nhrp nhs detail
Legend:
E=Expecting replies
R=Responding
Tunnel1:
10.1.1.1
Pending Registration Requests:
Registration Request: Reqid 1, Ret 64
The table below describes the significant field shown in the display.

Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)

192
Number Ranges
0 to 1000
1 to 999
0 to 1000
0 to 9
0 to 9
0 to 65520
0 to 2147483647
0 to 0
0 to 0
1 to 128
0 to 9
0 to 2147483647
0 to 65535
1 to 4094
E req-sent 128 req-failed 1
NHS 10.1.1.1
Interface Descriptions
Autonomic-Networking virtual interface
Auto-Template interface
Multiprotocol Label Switching (MPLS)
interface
GigabitEthernet IEEE 802.3z
Internal interface
Locator/ID Separation Protocol (LISP) virtual
interface
Loopback interface
Null interface
Protection-group controller
Port channel interface
TenGigabitEthernet interface
Tunnel interface
MPLS Transport Profile interface
VLAN interface
repl-recv 0