Clear Ip Mroute - Cisco Catalyst 3650 series Command Reference Manual

clear ip mroute

To delete entries from the IP multicast routing table, use the clear ip mroute privileged EXEC command.
clear ip mroute [vrf vrf-name]{* | ip-address | group-address}[hostname | source-address]
Syntax Description
vrf vrf-name
*
ip-address
group-address
hostname
source-address
Command Default
None
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
The group-address variable specifies one of the following:
• Name of the multicast group as defined in the DNS hosts table or with the ip host command.
• IP address of the multicast group in four-part, dotted notation.
If you specify a group name or address, you can also enter the source argument to specify a name or address
of a multicast source that is sending to the group. A source does not need to be a member of the group.
Examples The following example shows how to delete all entries from the IP multicast routing table:
Device# clear ip mroute *
(Optional) Specifies the name that is assigned to the multicast VPN
routing and forwarding (VRF) instance.
Specifies all Multicast routes.
Multicast routes for the IP address.
Multicast routes for the group address.
(Optional) Multicast routes for the host name.
(Optional) Multicast routes for the source address.
Modification
This command was introduced.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
clear ip mroute
215