Net-Dhcp - Cisco Catalyst 3650 series Command Reference Manual

net-dhcp

net-dhcp
To initiate an IPv4 Dynamic Host Control Protocol (DHCP) request for remote configuration, use the net-dhcp
command in rommon mode.
net-dhcp [timeout]
Syntax Description
timeout
Command Modes
Rommon
Command History
Release
Cisco IOS XE Everest 16.5.1
Usage Guidelines
This command initiates an IPv4 DHCP request and processes the reply.
Examples The following example shows how to enable the net-dhcp command:
Device: net-dhcp
Related Commands
Command
net-debug
net-show
net6-dhcp
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
588
(Optional) Timeout in seconds.
Modification
This command was introduced.
Description
Displays or changes the network debug values.
Displays network parameters.
Initiates an IPv6 DHCP request for remote
configuration.