show errdisable detect
To display error-disabled detection status, use the show errdisable detect command in EXEC mode.
show errdisable detect
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
User EXEC
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SE
Usage Guidelines
A gbic-invalid error reason refers to an invalid small form-factor pluggable (SFP) module.
The error-disable reasons in the command output are listed in alphabetical order. The mode column shows
how error-disable is configured for each feature.
You can configure error-disabled detection in these modes:
• port mode—The entire physical port is error-disabled if a violation occurs.
• vlan mode—The VLAN is error-disabled if a violation occurs.
• port/vlan mode—The entire physical port is error-disabled on some ports and is per-VLAN error-disabled
Examples
This is an example of output from the show errdisable detect command:
Device> show errdisable detect
ErrDisable Reason
-----------------
arp-inspection
bpduguard
channel-misconfig
community-limit
dhcp-rate-limit
dtp-flap
gbic-invalid
inline-power
invalid-policy
l2ptguard
link-flap
loopback
lsgroup
on other ports.
Detection
---------
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Mode
----
port
vlan
port
port
port
port
port
port
port
port
port
port
port
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
show errdisable detect
Modification
This command was introduced.
73