show power inline
To display the Power over Ethernet (PoE) status for the specified PoE port, the specified stack member, or
for all PoE ports in the switch stack, use the show power inline command in EXEC mode.
show power inline [police| priority] [interface-id | module stack-member-number] [detail]
Syntax Description
police
priority
interface-id
module stack-member-number
detail
Command Modes
User EXEC
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SE
Examples
This is an example of output from the show power inline command. The table that follows describes the
output fields.
Device> show power inline
Module
------
1
2
3
4
Interface Admin
--------- ------ ---------- ------- ------------------- ----- ----
Gi3/0/1
Gi3/0/2
Gi3/0/3
Gi3/0/4
Gi3/0/5
Gi3/0/6
Available
Used
Remaining
(Watts)
(Watts)
---------
--------
---------
n/a
n/a
n/a
n/a
1440.0
15.4
720.0
6.3
Oper
Power
(Watts)
auto
off
0.0
auto
off
0.0
auto
off
0.0
auto
off
0.0
auto
off
0.0
auto
off
0.0
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
(Optional) Displays the power policing information about
real-time power consumption.
(Optional) Displays the power inline port priority for each port.
(Optional) ID of the physical interface.
(Optional) Limits the display to ports on the specified stack
member.
This keyword is supported only on stacking-capable switches.
(Optional) Displays detailed output of the interface or module.
(Watts)
n/a
n/a
1424.6
713.7
Device
Class Max
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
show power inline
Modification
This command was introduced.
30.0
30.0
30.0
30.0
30.0
30.0
115