Command Reference, Cisco Ios Xe Everest 16.5.1A (Catalyst 3650 Switches - Cisco Catalyst 3650 series Command Reference Manual

show cts role-based permissions
Examples
The following is sample output from the show role-based permissions command:
Switch# show cts role-based permissions
IPv4 Role-based permissions default (monitored):
default_sgacl-02
Permit IP-00
IPv4 Role-based permissions from group 305:sgt to group 306:dgt (monitored):
test_reg_tcp_permit-02
RBACL Monitor All for Dynamic Policies : TRUE
RBACL Monitor All for Configured Policies : FALSE
IPv4 Role-based permissions from group 6:SGT_6 to group 6:SGT_6 (configured):
mon_1
IPv4 Role-based permissions from group 10 to group 11 (configured):
mon_2
RBACL Monitor All for Dynamic Policies : FALSE
RBACL Monitor All for Configured Policies : FALSE
Related Commands
Command
cts role-based permissions
cts role-based monitor

Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)

812
Description
Enables permissions from a source group to a
destination group.
Enables role-based access list monitoring.