Clear Autonomic - Cisco Catalyst 3650 series Command Reference Manual

clear autonomic

clear autonomic
To clear or reset autonomic information, use the clear autonomic command in privileged EXEC configuration
mode.
clear autonomic {device| neighbor neighbor's UDI| registrar accepted-device device UDI}
Syntax Description
device
neighbor udi
registrar accepted-device udi
Command Default
No default behavior or values.
Command Modes
Privileged EXEC (#)
Command History
Release
Cisco IOS XE Denali 16.3.1
Usage Guidelines
The clear autonomic device command clears or resets all device-specific autonomic information, including
the information obtained in the bootstrapping process. The clear autonomic neighbor command clears the
neighbor-related information learned during the neighbor discovery. If no neighbor is specified, the command
clears the entire neighbor database. The clear registrar accepted-device clears the public key stored for each
device enrolled by the registrar.
Examples To clear all device-specific autonomic information:
Device #clear autonomic device
% invoke syslog_an_delete_host: vrf cisco_autonomic
discriminator
Device#
Jul 15 05:55:53.987: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:55:53.988: %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified. Issue "write
memory" to save new IOS PKI configuration
Jul 15 05:55:53.990: %AN-6-ACP_DIKE_TO_NBR_REMOVED: Removed DIKE on ACP Tunnel100000 from
Device (Addr FD08:2EEF:C2EE:0:E865:493B:ACFB:7) to Neighbor (Addr
FD08:2EEF:C2EE:0:E865:493B:ACFB:5) connected on interface GigabitEthernet1/0/3
Jul 15 05:55:54.006: %AN-6-ACP_CHANNEL_TO_NBR_REMOVED: Removed ACP Tunnel100000 from Device
(Addr FD08:2EEF:C2EE:0:E865:493B:ACFB:7) to Neighbor (Addr FD08:2EEF:C2EE:0:E865:493B:ACFB:5)
connected on interface GigabitEthernet1/0/3
Jul 15 05:55:54.015: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:55:54.016: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback100000, changed
state to down
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
890
Clears or resets device information.
Clears or resets neighbor information.
Clears public key stored for each enrolled device
Modification
This command was introduced.