Service-Routing Mdns-Sd - Cisco Catalyst 3650 series Command Reference Manual
Cisco ios xe everest 16.5.1a
Hide thumbs
Also See for Catalyst 3650 series:
- Hardware installation manual (126 pages) ,
- Configuration manual (94 pages) ,
- Manual (94 pages)
Table of Contents
Advertisement
service-routing mdns-sd
To enable mDNS gateway functionality for a device and enter multicast DNS configuration mode, use the
service-routing mdns-sd command. To restore default settings and return to global config mode, enter the
no form of the command.
service-routing mdns-sd
no service-routing mdns-sd
This command has no arguments or keywords.
Command Default
Disabled.
Command Modes
Global configuration
Command History
Release
Cisco IOS XE 3.3SE
Usage Guidelines
mDNS gateway functionality can only be enabled or disabled globally, not on a per-interface basis. The service
filter policy and redistribution can be configured globally as well as on a per-interface basis. Any interface
specific configuration overrides the global configuration.
Examples
This example shows how to enable mDNS gateway functionality for a device and enter multicast DNS
configuration mode:
Device(config)# service-routing mdns-sd
Modification
This command was introduced.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
service-routing mdns-sd
249
Advertisement
Table of Contents
