Command Reference, Cisco Ios Xe Everest 16.5.1A (Catalyst 3650 Switches - Cisco Catalyst 3650 series Command Reference Manual
Cisco ios xe everest 16.5.1a
Hide thumbs
Also See for Catalyst 3650 series:
- Hardware installation manual (126 pages) ,
- Configuration manual (94 pages) ,
- Manual (94 pages)
Table of Contents
Advertisement
ip pim send-rp-announce
well-known group CISCO-RP-ANNOUNCE (224.0.1.39). This message announces the router as a candidate
RP for the groups in the range described by the access list.
Examples
The following example shows how to configure the switch to send RP announcements out all Protocol
Independent Multicast (PIM)-enabled interfaces for a maximum of 31 hops. The IP address by which the
switch wants to be identified as RP is the IP address associated with Gigabit Ethernet interface 1/0/1 at an
interval of 120 seconds:
Device(config)# ip pim send-rp-announce GigabitEthernet1/0/1 scope 31 group-list 5 interval
120
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
238
Advertisement
Table of Contents
