Show Ip Igmp Filter - Cisco Catalyst 3650 series Command Reference Manual

show ip igmp filter

To display Internet Group Management Protocol (IGMP) filter information, use the show ip igmp filter
command in privileged EXEC command mode.
show ip igmp [vrf vrf-name] filter
Syntax Description
vrf vrf-name
Command Default
IGMP filters are enabled by default.
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SE
Usage Guidelines
The show ip igmp filter command displays information about all filters defined on the device.
Examples
The following is sample output from the show ip igmp filter command:
Device# show ip igmp filter
IGMP filter enabled
(Optional) Supports the multicast VPN routing and forwarding (VRF)
instance.
Modification
This command was introduced.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
show ip igmp filter
251