License Right-To-Use - Cisco Catalyst 3650 series Command Reference Manual

license right-to-use

To configure right-to-use access point adder licenses on the device, use the license right-to-use command
in privileged EXEC mode.
license right-to-use {activate | deactivate} apcount | ipbase | ipservices | lanbase
Syntax Description
activate
deactivate
apcount count
ipbase count
ipservices count
lanbase count
Syntax Description
This command has no arguments or keywords.
Command Default
No default behavior or values.
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Examples
This example shows how to activate an ap-count evaluation license:
Device# license right-to-use activate apcount evaluation
Device# end
Modification
This command was introduced.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
license right-to-use
Activates permanent or evaluation
ap-count licenses.
Deactivates permanent or
evaluation ap-count licenses.
Specifies the number of ap-count
licenses added.
You can configure the number of
adder licenses from 5 to 50.
Activates ipbase licenses on the
switch.
Activates ipservices licenses on the
switch.
Activates lanbase licenses on the
switch.
923